EBay musings

Moderator: Mike Everman

Post Reply
pezman
Posts: 613
Joined: Fri Oct 08, 2004 4:13 am
Antipspambot question: 0
Location: USA

re: EBay musings

Post by pezman »

If you want to see lots of Stainless steel and machine tools to hack it into something hot & noisy, check out www.sas.net.

Also, Penn State's creamery is liquidating its ice-cream making equipment. More stainless than you can shake a dilly bar at and a few fridges that will make your neighbor jealous that he only has a whimpy little Sub-Zero.
http://www.surplus.psu.edu/Creamery%20Main%20Page.htm
Bruno Ogorelec
Posts: 3542
Joined: Sat Oct 04, 2003 7:31 am
Antipspambot question: 0
Location: Zagreb, Croatia

Re: re: EBay musings

Post by Bruno Ogorelec »

pezman wrote:If you want to see lots of Stainless steel and machine tools to hack it into something hot & noisy, check out www.sas.net.

Also, Penn State's creamery is liquidating its ice-cream making equipment. More stainless than you can shake a dilly bar at and a few fridges that will make your neighbor jealous that he only has a whimpy little Sub-Zero.
http://www.surplus.psu.edu/Creamery%20Main%20Page.htm
WOW! I creamed my pants after a look at the creamery equipment. It is all high-grade steel, too. Normally very expensive.

Given the run of that facility, I think the participants of this forum could build a veritable air force. Kind of opposite to the 'swords to ploughshares' cliche, don't you think?

Creamers to screamers? Dairy to airy? Or, in less successful cases, butter to splutter?
pezman
Posts: 613
Joined: Fri Oct 08, 2004 4:13 am
Antipspambot question: 0
Location: USA

re: EBay musings

Post by pezman »

rofl
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Presentation is Everything
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Presentation is Everything
Mike Everman
Posts: 5024
Joined: Fri Oct 31, 2003 7:25 am
Antipspambot question: 0
Location: santa barbara, CA
Contact:

Re: re: EBay musings

Post by Mike Everman »

that Z jet is an incredible work of art!
Mike Often wrong, never unsure.
__________________________
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

On picture 4, if you look at the retainer at 3 o'clock I believe that little hole is a pressure tap to help drive the fuel system, along with aspiration from the vacuum in the throat it also gets pressurization bled from the combustion chamber. Or at least I remember one of his designs with such a philosophy.
Mark
Presentation is Everything
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Presentation is Everything
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Presentation is Everything
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Presentation is Everything
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Presentation is Everything
Al Belli
Posts: 557
Joined: Thu Oct 09, 2003 10:36 pm
Antipspambot question: 0
Location: Pennsylvania - USA

re: EBay musings

Post by Al Belli »

Hi,

Check out Erics advanced Lockwood style plans :


http://cgi.ebay.com/ThermalPulse-180-AD ... dZViewItem

Al Belli
hagent
Posts: 413
Joined: Sun Feb 06, 2005 9:01 pm
Antipspambot question: 0
Location: Simi Valley CA

re: EBay musings

Post by hagent »

http://cgi.ebay.com/ebaymotors/Dynatech ... 3924QQrdZ1

This might be used for a few things.
Hagen Tannberg
Mark
Posts: 10968
Joined: Sat Oct 11, 2003 10:14 pm

re: EBay musings

Post by Mark »

Small augmenters.
Mark
http://tinyurl.com/gz43t
Presentation is Everything
hagent
Posts: 413
Joined: Sun Feb 06, 2005 9:01 pm
Antipspambot question: 0
Location: Simi Valley CA

Re: re: EBay musings

Post by hagent »

Mark wrote:Small augmenters.
Mark
http://tinyurl.com/gz43t
What's a tumbler? Looks like a cup. I wonder if it's open on both ends. Any ideas on the size?

Thanks Mark
Hagen Tannberg
Post Reply