Turbo jet plans

Moderator: Mike Everman

Mike Everman
Posts: 5007
Joined: Fri Oct 31, 2003 7:25 am
Antipspambot question: 0
Location: santa barbara, CA
Contact:

Re: Turbo jet plans

Post by Mike Everman » Mon Nov 14, 2011 2:35 am

Thank you for that, John. I found when I started to grok the math that most of my turbine ideas were not going to work. And the deeper it goes, the deeper it goes, too. Grasping that the thrust is a small by-product of the work going on is the first step!
Mike Often wrong, never unsure.
__________________________

racketmotorman
Posts: 503
Joined: Sat Jul 23, 2005 11:11 pm
Antipspambot question: 0
Location: Australia

Re: Turbo jet plans

Post by racketmotorman » Mon Nov 14, 2011 3:26 am

Hi Mike

Yeh , we need to do a bit of maths in the beginning to see if we're in the ballpark with a design and don't have a major mismatch of components, thankfully theres now plenty of info available to do that :-)

Cheers
John

redneck
Posts: 94
Joined: Tue Dec 26, 2006 10:32 am

Re: Turbo jet plans

Post by redneck » Thu Nov 14, 2013 1:44 am

Ractetmotorman.... if you are still out there, thank you very much for all the information you posted here. I am planning on building an axial flow motor very soon. I am in the phases where I need to know everything... most importantly, to know what it is I am not even aware of. This information in your post is very appreciated. Thank you.
hooowee that was loud! do it again!

Post Reply