Thanks John for reply. I thought that tips can't be 'blunt", but i wasn't guaranted. Also I'am trying to redesign the CC sustaining other working jet engine drawings. Also, maybe you can say how to calculate diffuser angles knowing about compressor nothing?
Ainis.
Combustion chamber
Moderator: Mike Everman
-
racketmotorman
- Posts: 503
- Joined: Sat Jul 23, 2005 11:11 pm
- Antipspambot question: 0
- Location: Australia
Re: Combustion chamber
Hi Anis
You need to do a complete engine design and that requires measuring everything accurately to determine flow areas etc , not an easy job from the other side of the world:-((
Do you have a copy of Thomas Kamps book ?? if you do , it has correction factors for scaling up his engine , if you don't have his book , I'd strongly suggest you get a copy as it'll explain the processes much better than I could by limited email exchanges
)
Cheers
John
You need to do a complete engine design and that requires measuring everything accurately to determine flow areas etc , not an easy job from the other side of the world:-((
Do you have a copy of Thomas Kamps book ?? if you do , it has correction factors for scaling up his engine , if you don't have his book , I'd strongly suggest you get a copy as it'll explain the processes much better than I could by limited email exchanges
)Cheers
John
Re: Combustion chamber
Yes, I have that book. Yes, i saw the scaling factors. Ok thanks for help.