Ive been building a series of ramjets with little succes.
would these numbers make a somewhate effieceient ram jet engine?
thrust- 35-40 lbs
diffuser entrence area- 5.256 in
nozzle exit area-4.396 in
cobustion chamber length-9.652 in
total length-19.304 in.
nozzle exit cone angle 8.56 degrees
entrence to cobustion chamber-5.272 in
combusiton chamber exit-4.370 in
combustion chamber (total) diameter-7.681 in
Is this an effcient RamJet design?
Moderator: Mike Everman
-
Harabec
- Posts: 18
- Joined: Fri Dec 10, 2004 4:25 pm
- Antipspambot question: 0
- Location: MAyfield NY
- Contact:
Is this an effcient RamJet design?
needs supervision.........
-
Viv
- Posts: 2158
- Joined: Sat Oct 04, 2003 2:35 pm
- Antipspambot question: 125
- Location: Normandy, France, Wales, Europe
- Contact:
re: Is this an effcient RamJet design?
Theres a nice little program called RJSC I downloaded from a nasa or naca site years ago.
Try this link, its got some information on the site that may help you and a link near the bottom for the program.
http://www.alt-accel.com/arla/news1.htm
If you cant find it I have a zip of the original download but I am on dial up and its a meg, so would prefure you to find it rather then me waight an hour to post it;-)
Viv
Try this link, its got some information on the site that may help you and a link near the bottom for the program.
http://www.alt-accel.com/arla/news1.htm
If you cant find it I have a zip of the original download but I am on dial up and its a meg, so would prefure you to find it rather then me waight an hour to post it;-)
Viv