youtube

Off topic posts are welcome in this forum!
No smear campaign, or you will be banned!

Moderator: Mike Everman

Post Reply
Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Fri Oct 14, 2016 1:28 am

Interesting how the rings deflect off the surface of the water at the end of the clip.
How To Use the Torid Pulse
https://www.youtube.com/watch?v=fHGATS2GumI
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Sat Nov 26, 2016 12:30 am

"This is a slip fit. Typically they have about a .0005" difference in size. The wires on an edm machine range but are generally .02 to .05" but I can get different sizes. But yes these were cut from 2 separate pieces. That's not the same piece of material the spade was cut from."
An impossibly perfect fit http://i.imgur.com/DAs75ze.gifv

https://www.youtube.com/watch?v=pBueWfzb7P0

https://www.youtube.com/watch?v=FfNPkqDOqd4
Presentation is Everything

Kool
Posts: 115
Joined: Wed Oct 01, 2008 7:39 pm
Antipspambot question: 125
Location: The Netherlands

Re: youtube

Post by Kool » Tue Jun 13, 2017 7:57 pm

...It's better to generate heat efficiently, than recover it efficiently...

metiz
Posts: 1575
Joined: Fri Apr 21, 2006 6:34 pm
Antipspambot question: 125
Location: Netherlands

Re: youtube

Post by metiz » Tue Jun 13, 2017 8:06 pm

Lol it's a scaled version of the M500, tailpipe reinforcements and all
Quantify the world.

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Fri Jun 30, 2017 5:25 pm

How to Build a 4 Barrelled Rocket Launcher
http://con.ca/view/news/12042-How-to-Bu ... t-Launcher
Presentation is Everything

PyroJoe
Posts: 1743
Joined: Wed Aug 29, 2007 5:44 pm
Antipspambot question: 125
Location: Texas

Re: youtube

Post by PyroJoe » Fri Jul 14, 2017 2:19 pm

Good find, I may have to try one of those. :D

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Mon Jul 17, 2017 12:15 am

When I did this experiment here with a longer plastic tube for the propane and air, the can that shot out made a deafening bang and that curved bottom on the can that shot out was completely recurved the other direction. It's strange how a longer tube builds a better hammer wave or whatever you would call it. I guess it's kind of like that guy's plastic bottle cannon, that confinement really helps the thrust.
https://www.youtube.com/watch?v=kCppEmcRGCE
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Mon Jul 17, 2017 12:29 pm

chAIR -Manned multicopter Part 25 Media day2 electric aircraft Axel Borg
https://www.youtube.com/watch?v=5zoP9f-ebm4
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Sun Jul 23, 2017 2:44 pm

The old bang start technique ...
https://www.youtube.com/watch?v=8oJspWPIDJk
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Mon Jul 31, 2017 10:17 pm

Yet another
100x faster, 10x cheaper: 3D metal printing is about to go mainstream
http://newatlas.com/desktop-metal-3d-printing/50654/

Desktop Metal Production System is about to take 3D printing into the mainstream
https://www.youtube.com/watch?v=3Pk7Mq7ESwI
Presentation is Everything

metiz
Posts: 1575
Joined: Fri Apr 21, 2006 6:34 pm
Antipspambot question: 125
Location: Netherlands

Re: youtube

Post by metiz » Mon Jul 31, 2017 10:51 pm

I was realy excited to read that article, until I saw the 100 grand price. Not quite mainstream. 100 grand will buy you a lot of nice machining tools
Quantify the world.

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Mon Jul 31, 2017 11:06 pm

Yea, the modern marvels are money marvels.
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Tue Aug 15, 2017 10:01 pm

Kind of an interesting pause before the jam jar revs up.
https://www.youtube.com/watch?v=SL2MzEPhHqI#t=11s
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Wed Aug 16, 2017 2:11 pm

The $140 Mail-Order CRISPR Kit: Is Unregulated Biohacking the Future of Science?
https://www.youtube.com/watch?v=odE8dNcklks
Presentation is Everything

Mark
Posts: 10931
Joined: Sat Oct 11, 2003 10:14 pm

Re: youtube

Post by Mark » Thu Sep 14, 2017 10:09 am

"Good job she is wearing a safety bikini" ha
https://www.youtube.com/watch?v=ONyUWirIWfk
Presentation is Everything

Post Reply