chamber combustion performance

[A.G.G.]

Hi, i have a question for people with experience in homemade jetengines. how can i get the best performance in my chamber combustion ? my turbocharger is a : Garret inducer 49 mm.

thanks
AGG

[racketmotorman]

Hi AGG

Make is as large as possible so that air velocities are low , crossectional area of the flametube to be at least 3 times the inducer area , your inducer has 1,885 sq mms , so the flametube needs 5657 sq mms or ~85mm dia if a single can type.

Cheers
John

[A.G.G.]

thank you very much is just that i wanted now let's working on my proyect. i will try upload photos during week.

Cheers
Andres