G360 CONCEPT
Moderator: Mike Everman
-
- Posts: 474
- Joined: Mon Jul 30, 2007 2:43 am
- Antipspambot question: 0
- Location: British living in Chile
G360 CONCEPT
Here’s a concept , Chinese and thermo versions, no dims just ideas, I can see some potential advantages and some disadvantages, the question is would the advantages outweigh the disadvantages?
Any comments welcome
Any comments welcome
-
- Posts: 4140
- Joined: Sun Oct 05, 2003 1:17 am
- Antipspambot question: 0
- Location: Mingo, Iowa USA
- Contact:
Re: G360 CONCEPT
I like it!
Build it.
L Cottrill
Build it.
L Cottrill
-
- Posts: 5007
- Joined: Fri Oct 31, 2003 7:25 am
- Antipspambot question: 0
- Location: santa barbara, CA
- Contact:
Re: G360 CONCEPT
Grim - Build it man !
The CC and the intake are going to get rather hot -
which should be interesting...
The CC and the intake are going to get rather hot -
which should be interesting...
-
- Posts: 1063
- Joined: Mon Jun 05, 2006 4:28 pm
- Antipspambot question: 0
- Location: Brisbane, Australia
- Contact:
Re: G360 CONCEPT
Cool and compact mate... and stinkin hot... what more could you ask for Grim.
Oh I replied (Finally) to your pm man thats fine, go for it.
Peace and good luck with this one.
James.
Oh I replied (Finally) to your pm man thats fine, go for it.
Peace and good luck with this one.
James.
-
- Posts: 474
- Joined: Mon Jul 30, 2007 2:43 am
- Antipspambot question: 0
- Location: British living in Chile
Re: G360 CONCEPT
Thanks all for the replies ,
I have this dream that the entrained air will actually cool the combustion chamber, thus heating the air , etc, etc,
Dreams are fine , hot metal is another thing , we shall see.
I have this dream that the entrained air will actually cool the combustion chamber, thus heating the air , etc, etc,
Dreams are fine , hot metal is another thing , we shall see.
-
- Posts: 205
- Joined: Sun Feb 25, 2007 4:51 am
- Antipspambot question: 0
- Location: Australia
- Contact:
Re: G360 CONCEPT
Looking good! Cant tell in the pic. but is the rear CC wall conical to spread the exhaust around the engine? or is it flat which I think is going to nagate the exhaust thrust almost completely?
Bribie Islands resident mad scientist!http://www.geocities.com/ozpulse@y7mail ... 5835711956
-
- Posts: 474
- Joined: Mon Jul 30, 2007 2:43 am
- Antipspambot question: 0
- Location: British living in Chile
Re: G360 CONCEPT
Hi Chadley , the front dome plate is semi domed about 1/3 sphere , I was tempted to do a cone but settled on domed because i think it will dissipate heat better , but i am still not sure i made the right choice , will try it as is , then maybe put a cone on , lots of unknowns here, will be interesting .
Re: G360 CONCEPT
To me, it starts to remind me of the shape of those wave engines seen in Foa's book, Elements of Flight Propulsion, if anyone out there has a copy, especially the way the smaller port curves off the combustion chamber. Of course it's not a wave engine, but it sure looks like it's going in that direction. Foa's book also has a nice chapter on pulsejets. After Reynst's book, I guess that it's the next best book on pulsejets, if it is the same edition. Seems there were a few volumes or maybe not, I can't remember? I would ask the seller if you wanted to buy this book.
http://www.amazon.com/gp/product/B000E3 ... e=&seller=
http://www.amazon.com/gp/product/B000E3 ... e=&seller=
Presentation is Everything
-
- Posts: 474
- Joined: Mon Jul 30, 2007 2:43 am
- Antipspambot question: 0
- Location: British living in Chile
Re: G360 CONCEPT
Some photos of progress so far, PIGLET, ha
The augmenter looks way big , but is actually smaller than the theoretical size according to the NASA report and Bruno’s paper ,
Testing will tell.
The augmenter looks way big , but is actually smaller than the theoretical size according to the NASA report and Bruno’s paper ,
Testing will tell.
-
- Posts: 1063
- Joined: Mon Jun 05, 2006 4:28 pm
- Antipspambot question: 0
- Location: Brisbane, Australia
- Contact:
Re: G360 CONCEPT
I have to agree with matiz here, get off your ass get out there and get us some figures, my god man, she's a farking perla.
Excuse the language but she's a F*%#(%ing RIPPER!
GO GOGOGOGOGOG!!!!!!!!
Excuse the language but she's a F*%#(%ing RIPPER!
GO GOGOGOGOGOG!!!!!!!!