New set of linear FWE plans

Moderator: Mike Everman

Post Reply
steve
Posts: 1029
Joined: Sun Jun 06, 2004 12:29 am
Antipspambot question: 0
Location: Clinton Conneticut / Melbourne Flordia
Contact:

New set of linear FWE plans

Post by steve » Mon Feb 28, 2005 11:25 pm

There seems to be some considerable interest in this engine and several requests for plans, so I thought I would whip some up. (by whip some up, I mean spend 5 hours debating with myself what to include, how to position everything, colors, fonts, etc) I think it was worth it though.
Attachments
LinearFWEplansS.JPG
(114.24 KiB) Downloaded 2377 times
Image

mk
Posts: 1053
Joined: Mon Jan 19, 2004 8:38 pm
Antipspambot question: 0
Location: FRG

Re: New set of linear FWE plans

Post by mk » Tue Mar 01, 2005 6:21 pm

Very nice, Steve.

I'd suggest posting plans of other (front inlet) FWEs under this topic, too.
mk

Mike Everman
Posts: 4894
Joined: Fri Oct 31, 2003 7:25 am
Antipspambot question: 0
Location: santa barbara, CA
Contact:

Re: New set of linear FWE plans

Post by Mike Everman » Tue Mar 01, 2005 7:16 pm

This is a proven engine and the plans are superb. Please post it above in the "looking for plans" sticky(?)
Mike
__________________________
Follow my technical science blog at: http://mikeeverman.com/
Get alerts for the above on twitter at: http://twitter.com/mikeeverman

francisco
Posts: 226
Joined: Tue Nov 30, 2004 1:06 pm
Antipspambot question: 0
Location: RIO CUARTO, CORDOBA, ARGENTINA

re: New set of linear FWE plans

Post by francisco » Fri Mar 25, 2005 4:55 am

hola: constui el fwe (entro otros) pero no consigo que este funcione, en realidad ninguno de los 3 fwe que constui funcionaron, a que debe.

los motores fueron costuidos a la perfeccion y tal cual lo indican los planos. ¿ puede haber una falla en los planos?.
usted me puede decir que relacion matematica hay entre la camara de combustion, la pipa de entreda y el caño de salida.

gracias .
francisco
"I DONT`T SUFFER OF MADNESS, I ENJOY IT CONTINUALLY"

fran_rio88@hotmail.com

steve
Posts: 1029
Joined: Sun Jun 06, 2004 12:29 am
Antipspambot question: 0
Location: Clinton Conneticut / Melbourne Flordia
Contact:

re: New set of linear FWE plans

Post by steve » Fri Mar 25, 2005 5:34 am

An engine built exactly to those plans will run, this has been independently verified by at least two other people (nick and eric), so the problem must either be with your starting procedure or with your fuel supply. If you can give more specific information or post some pictures then we should be able to help you.

(mala traducción) Un motor construido exactamente a esos planes funcionará, esto ha sido verificada independientemente por por lo menos dos otras personas (Nick y Eric), así que el problema debe estar con su procedimiento que comienza o con su fuente de combustible. Si usted puede dar una información más específica o fijar algunos cuadros entonces debemos poder ayudarle.
Image

francisco
Posts: 226
Joined: Tue Nov 30, 2004 1:06 pm
Antipspambot question: 0
Location: RIO CUARTO, CORDOBA, ARGENTINA

re: New set of linear FWE plans

Post by francisco » Fri Mar 25, 2005 5:44 am

me gustaria saber que cantidad de propano debo injectarle y que cantidad de aire. ¿ el aire es en forma constante?.

gracias de todas formas. no puedo fijar cuadros porque se rompio mi camara.jejeje


francisco.
"I DONT`T SUFFER OF MADNESS, I ENJOY IT CONTINUALLY"

fran_rio88@hotmail.com

Post Reply