Suppliers of 321 Stainless

Moderator: Mike Everman

Post Reply
Mr. Yuk
Posts: 35
Joined: Tue Dec 21, 2004 11:07 pm
Antipspambot question: 0
Location: Pennsylvania, USA
Contact:

Suppliers of 321 Stainless

Post by Mr. Yuk » Wed Aug 17, 2005 3:54 pm

I have been looking for suppliers of 321 sheet and tube in my searches I have found several cheap companies. First and foremmost Conception GLC, inc. sells 321 sheet and I'm sure tube of certain diameters and I know their prices are reasonable so look into them. www.glc-inc.ca

I found this Stainless Headers company that is actually the same company as the Aviation Exhaust company. They are very reasonable, and happy to do small orders and they ship UPS. They sell sheet and tube, they are the cheapest for tube so far. www.stainlessheaders.com / http://www.aircraftexhaust.net/

Here is another aircaft exhaust site that may br promising for tube: http://www.customaircraft.com/index.html

Here is and exhaust company that has fair prices on 321 tube. They also sell Iconel. http://www.burnsstainless.com/321tubing ... ht321.html

No prices posted, but a good selection. http://www.spdexhaust.com/tubing-specs.html

Very good selection, but not as cheap as Stainlessheaders.com and GLC.
http://www.sliceofstainless.com/html/index.php

lojbeck
Posts: 11
Joined: Sun Nov 19, 2006 12:44 am
Antipspambot question: 0
Location: Cameron, NC, USA

Source for 304 mandrel-bent tubing

Post by lojbeck » Sun Dec 31, 2006 3:27 am

JC Whitney sells 16 ga 304 stainless exhaust tubing. See the link: http://www.jcwhitney.com/autoparts/Prod ... 61/c-10101

The only straight tubing they offer is T409SS in 11/2" O.D.

Link :http://www.jcwhitney.com/autoparts/Prod ... ess+tubing

gameboyz
Posts: 13
Joined: Sat Jun 16, 2007 11:56 am
Antipspambot question: 0

Stainless steel pipes?

Post by gameboyz » Mon Jun 18, 2007 11:59 am

Cant i just buy the stainless steel tubes (as stainless steel pipes) from the DIY shops?
careful there goes a finger; oh your leg too!

Mark
Posts: 10739
Joined: Sat Oct 11, 2003 10:14 pm

Post by Mark » Thu Jun 28, 2007 9:24 pm

Presentation is Everything

isprins
Posts: 11
Joined: Mon Jun 09, 2008 7:12 am

Re: Suppliers of 321 Stainless

Post by isprins » Tue Jun 10, 2008 10:55 am

It is altso possible to find a great deal of stainless tubing at your local metal recicler/scrapheap.
There are loads of 316SS at my local scrappy, the only trouble is that it can be entangled in to other stuff, but with some "frendly" persuation and some swearing it is possible to untangle the bits i want.

Post Reply