chamber combustion performance

Moderator: Mike Everman

Post Reply
A.G.G.
Posts: 36
Joined: Sun May 08, 2005 7:11 pm
Antipspambot question: 0
Location: mexico guadalajara

chamber combustion performance

Post by A.G.G. » Mon Oct 25, 2010 11:30 pm

Hi, i have a question for people with experience in homemade jetengines. how can i get the best performance in my chamber combustion ? my turbocharger is a : Garret inducer 49 mm.

thanks
AGG

racketmotorman
Posts: 503
Joined: Sat Jul 23, 2005 11:11 pm
Antipspambot question: 0
Location: Australia

Re: chamber combustion performance

Post by racketmotorman » Wed Oct 27, 2010 3:49 am

Hi AGG

Make is as large as possible so that air velocities are low , crossectional area of the flametube to be at least 3 times the inducer area , your inducer has 1,885 sq mms , so the flametube needs 5657 sq mms or ~85mm dia if a single can type.

Cheers
John

A.G.G.
Posts: 36
Joined: Sun May 08, 2005 7:11 pm
Antipspambot question: 0
Location: mexico guadalajara

Re: chamber combustion performance

Post by A.G.G. » Wed Oct 27, 2010 8:28 pm

thank you very much is just that i wanted :D now let's working on my proyect. i will try upload photos during week.

Cheers
Andres

Post Reply