Hi all!
I recently received a copy of Schreckling's book where he describes how to build the FD3. I'm about to start with the casing. The text says to open up the hole to 79mm while the drawing says 82mm diameter.
Which is the correct measurement?
Thanks
FD3-64 casing question
Moderator: Mike Everman
Re: FD3-64 casing question
I would think you are safe to go with the drawing. It is strange but I guess he must have decided to increase the diameter to help lower the exhaust temp when he was doing the drawings. It's a good book but have you found some his formulaes in the turbine and compressor calculations section to be written a little strangely? Maybe it's just me.
-
- Posts: 503
- Joined: Sat Jul 23, 2005 11:11 pm
- Antipspambot question: 0
- Location: Australia
Re: FD3-64 casing question
G'day Tim
Totally agree with you about his formulii . Kamp's book is a little easier to understand I feel, but even his reasoning is a little vague at times .
Where abouts are you here in Oz ??
Cheers
John
Totally agree with you about his formulii . Kamp's book is a little easier to understand I feel, but even his reasoning is a little vague at times .
Where abouts are you here in Oz ??
Cheers
John
Re: FD3-64 casing question
Hi John.
Where could I get copies of Kamp's book and any other books that might be useful? Is there an english translation of any of Kurt's references? I think the book on fans would be very interesting. I'm in Stawell, Victoria.
Cheers, Tim
Where could I get copies of Kamp's book and any other books that might be useful? Is there an english translation of any of Kurt's references? I think the book on fans would be very interesting. I'm in Stawell, Victoria.
Cheers, Tim
-
- Posts: 503
- Joined: Sat Jul 23, 2005 11:11 pm
- Antipspambot question: 0
- Location: Australia
Re: FD3-64 casing question
Hi Tim
Kamps book ..............
https://shop.traplet.com/search.aspx?q=thomas%20kamp&h=
https://shop.traplet.com/product.aspx?c=183
Can be purchased here in OZ/Sydney from ....
http://www.creativemodels.com.au/
http://www.creativemodels.com.au/pdf/books/traplet.pdf
If you'd like to Personal Mail (PM) me with your postal address I'll send you ( free) a CD copy of a large turbine engine theory text that might be of help with formulii, ............ at Stawell , you're a long way from most turbine related stuff , it'll come in handy , ...............I've some fellow DIY turbine collaberators in Melbourne that I can put you in touch with if you like, I'm in Sydney )
Cheers
John
Kamps book ..............
https://shop.traplet.com/search.aspx?q=thomas%20kamp&h=
https://shop.traplet.com/product.aspx?c=183
Can be purchased here in OZ/Sydney from ....
http://www.creativemodels.com.au/
http://www.creativemodels.com.au/pdf/books/traplet.pdf
If you'd like to Personal Mail (PM) me with your postal address I'll send you ( free) a CD copy of a large turbine engine theory text that might be of help with formulii, ............ at Stawell , you're a long way from most turbine related stuff , it'll come in handy , ...............I've some fellow DIY turbine collaberators in Melbourne that I can put you in touch with if you like, I'm in Sydney )
Cheers
John