hello all!
my name is stephan höglund and i live in sweden!
i am very very interested in starting to build a annular combustor turbojet engine based on a turbine wheel/kompressor wheel combination from a GARRETT TV94...now i wonder if anyone in here knows the best suitable partnumbers of turbine wheels and compressor wheels.....i dont seem to be able to find the needed data on the available wheels.....appreciate any help with these numbers.....best regards/stephan
a new turbojet project
Moderator: Mike Everman
-
racketmotorman
- Posts: 503
- Joined: Sat Jul 23, 2005 11:11 pm
- Antipspambot question: 0
- Location: Australia
Re: a new turbojet project
Hi Stephan
This might help , it was recently sent to a fellow collaberator .............. cheers john
comp 441813-0007 $111.42, each, 1 in our stock, 11 in stock at regional warehouse (3 - 7 day lead time)
turbine 442208-0001 $425.00 each. 7 in stock at regional warehouse (3 - 7 day lead time)
Pricing does not include shipping charges. All prices are quoted in US $ Dollars. We can ship by UPS, FEDEX, DHL, Post Office, or freight carrier of your choice.
For orders within the USA, we accept Visa, MasterCard, American Express, Discover, Bank Wire Transfer, or UPS COD (Cashier's check or Money Order). For International orders, payment can be made by Bank Wire Transfer.
Thank you for your inquiry.
R. Anthony Harper
J & H Diesel Service, Inc.
J & H Turbo Service, Inc.
P.O. Box 5278
3401 Hwy 82 East
Greenville, MS 38703 USA
International Phone: 662-378-8711
International FAX: 662-332-3561
E-mail: sales@jhdiesel.com
Web Page: http://www.jhdiesel.com
Our company brochure is at: http://www.jhdiesel.com/J%20&%20H%20Brochure.pdf
This might help , it was recently sent to a fellow collaberator .............. cheers john
comp 441813-0007 $111.42, each, 1 in our stock, 11 in stock at regional warehouse (3 - 7 day lead time)
turbine 442208-0001 $425.00 each. 7 in stock at regional warehouse (3 - 7 day lead time)
Pricing does not include shipping charges. All prices are quoted in US $ Dollars. We can ship by UPS, FEDEX, DHL, Post Office, or freight carrier of your choice.
For orders within the USA, we accept Visa, MasterCard, American Express, Discover, Bank Wire Transfer, or UPS COD (Cashier's check or Money Order). For International orders, payment can be made by Bank Wire Transfer.
Thank you for your inquiry.
R. Anthony Harper
J & H Diesel Service, Inc.
J & H Turbo Service, Inc.
P.O. Box 5278
3401 Hwy 82 East
Greenville, MS 38703 USA
International Phone: 662-378-8711
International FAX: 662-332-3561
E-mail: sales@jhdiesel.com
Web Page: http://www.jhdiesel.com
Our company brochure is at: http://www.jhdiesel.com/J%20&%20H%20Brochure.pdf
Re: a new turbojet project
thank you john......is that wheel combination the most suitable one?.....i saw those before i was wondering about other comp wheel possibilities......i found a nice outer shell for my engine so now it is no turning back....... 
....it is a stainless steel cylinder with an outer diameter of 8,5" it is a pressure cylinder which had about 7 bars max pressure before, it should work great here i think....best regards stephan
....it is a stainless steel cylinder with an outer diameter of 8,5" it is a pressure cylinder which had about 7 bars max pressure before, it should work great here i think....best regards stephan-
racketmotorman
- Posts: 503
- Joined: Sat Jul 23, 2005 11:11 pm
- Antipspambot question: 0
- Location: Australia
Re: a new turbojet project
Hi Stephan
An 8.5" dia case might be a little small as this comp wheel is 5.55" dia , it doesn't leave a lot of room for a diffuser .
Have you checked what Ash is doing on the TV94 Turbofan Build Thread here in the Gas Turbine Forum , next one down to yours
Cheers
John
An 8.5" dia case might be a little small as this comp wheel is 5.55" dia , it doesn't leave a lot of room for a diffuser .
Have you checked what Ash is doing on the TV94 Turbofan Build Thread here in the Gas Turbine Forum , next one down to yours
Cheers
John