Here is a paper, "PRACTICAL RAM JET DESIGN"
by William T. Decker, specific to the duct and rotor tip mounting,
beautifully cleaned up by Al Belli.
*submissions to this topic should be reference material only, please. Responses will be purged*
Essential Reading
Moderators: Tom, larry cottrill, Mike Everman
2 posts
• Page 1 of 1
Essential Reading
by Mike Everman » Thu Nov 30, 2006 3:25 pm
- Attachments
-
practical_subsonic_ram_jet_design_685.zip- (338.5 KiB) Downloaded 826 times
Mike
__________________________
Follow my technical science blog at: http://mikeeverman.posterous.com/
Follow Bell-Everman News at: http://www.bell-evermannews.com/
Get alerts for the above on twitter at: http://twitter.com/mikeeverman
__________________________
Follow my technical science blog at: http://mikeeverman.posterous.com/
Follow Bell-Everman News at: http://www.bell-evermannews.com/
Get alerts for the above on twitter at: http://twitter.com/mikeeverman
- Mike Everman
- Posts: 4775
- Joined: Fri Oct 31, 2003 7:25 am
- Location: santa barbara, CA
re: Essential Reading
by Al Belli » Thu Nov 30, 2006 7:42 pm
Hi Mike,
Here's the orig. link:
if the figures don't come up properly in the word .doc
http://www.alt-accel.com/arla/decker/ramjet.htm
Al Belli
Here's the orig. link:
if the figures don't come up properly in the word .doc
http://www.alt-accel.com/arla/decker/ramjet.htm
Al Belli
- Al Belli
- Posts: 557
- Joined: Thu Oct 09, 2003 10:36 pm
- Location: Pennsylvania - USA
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest