Tesla Valvular Conduit

Moderator: Mike Everman

Post Reply
maddogmark
Posts: 2
Joined: Mon Feb 25, 2013 6:55 am
Antipspambot question: 125

Tesla Valvular Conduit

Post by maddogmark » Fri Mar 01, 2013 7:10 pm

I have been doing some research, just a little, on the Tesla Valvular Conduit and I have found that although it may not completely block flow in one direction that it will dramatically reduce the flow. Check out the following link http://www.youtube.com/watch?v=25ElCGkQLTU. I would like to do a 3 stage experiment with the Escopette valveless pulsejet design. First I want to build a working Escopette. Once I get it built, I would like to see if I can attach a valvular conduit to the intake for stage 2. It may take some fine tuning go get it to work properly. Finally, stage 3, I have an experiment in mind to smooth out the exhaust pulses, and hopefully reduce noise. Is there anyone in N. E. Oklahome who feels like experimenting. Please let me know.
Top
maddogmark
Posts: 2
Joined: Mon Feb 25, 2013 6:55 am
Antipspambot question: 125

Re: Tesla Valvular Conduit

Post by maddogmark » Fri Mar 01, 2013 7:20 pm

Also, does anyone have the dimensions for the escopette.
Top
Post Reply

Return to “Valveless pulsejet forum”