www.pulse-jets.com

HERE IT IS! the engine you have been waiting for! the Thundequaker 5000 pro©! This one million pound pulse-jet engine will push any vehicle, building, mountain or planet of your choosing @ maybe 0.15hz and at a mere 140 meters long, will fit nicely in your sceme to take over the world! It's also large enough to build your mad scientist lab in, saving hundreds of dollars on rent each month!



Alrighty,

usefull free plans. picture 2 (obviously ) describes a approxamitely 5.2 pound thermojet engine. the intakes could use a bit of work but as is, this engine starts VERY easy and will throttle right to 5+ pounds. Yeah.....questions?

Nice, starting construction this evening, next to my secret subterranean lair.

Maybe I should just build it in Saudi Arabia to avoid fuel shortages.

Eric wrote:Nice, starting construction this evening, next to my secret subterranean lair.

Maybe I should just build it in Saudi Arabia to avoid fuel shortages.

Now I just need to figure out how to smuggle this thing through customs....hmmm

AHAHA! What a sales write up Metiz, gotta admit that was gold! "You are here" made me grin with evil.

Thanks for putting up your free plans for the 5+lb thermonese of yours, pretty sweet for only 600 mm. Nice lookin engine.

.

metiz wrote: This one million pound pulse-jet engine will push any vehicle, building, mountain or planet.

Most impressive.

Now, I am not saying that it will run as drawn, but by ignoring any combustion instabilities
that come along with its ginormous size, then I can easily provide you the maximum thrust.

And that would be... 245 kN (25,000 kg / 55,000 lbs)

Its little brother is also great: you don't have to move out every time you want to fire it up!

Cheers,
M.

Very nice but a tad small....

No. 2 looks fun too...

milisavljevic wrote:.

metiz wrote: This one million pound pulse-jet engine will push any vehicle, building, mountain or planet.

And that would be... 245 kN (25,000 kg / 55,000 lbs)
Cheers,
M.

ASUMING it would run at all and run stable, (it wont ) I'm pretty sure it would push close to one million pounds, come on man, thats a near 20 meter CC for 140 meter tailpipe length

You guys need to use the old scale, it 40 Orca power or 8 billion gerbilwatts

Wow, thats +5 pounds from a 23" length engine. Take it, the 100mm intake is the short side of the pipe.

What type of injector is driving this spry thumper?

Joe

PyroJoe wrote:Wow, thats +5 pounds from a 23" length engine. Take it, the 100mm intake is the short side of the pipe.

What type of injector is driving this spry thumper?

Joe

the 100mm is the centreline length. I did say they could use some work right
I use simple straight, open injectors maybe 45%/50% in. the injecors have a outside D of 6mm, inside of 4.

and now for some shameless advertising - the engine this has been tested on is for sale! check the "buy and sell" board. alternatively, if you live in the NL, go to either http://ncane.com/tvl or http://www.speurders.nl/overzicht/pulse ... =pulse-jet

The small one doesn't interest me, is the other one also for sale?
Fedde

ace_fedde wrote:The small one doesn't interest me, is the other one also for sale?
Fedde

I build one for you in the garage last night and took it for a spin today. I had a little fueling accident though...

STOP DROP AND ROLL!!!

Metiz,
What a shame! It melted I suppose?
Anyway, I don't need it anymore since I was outbidded on a vehicule that it was supposed to be mounted on:

For Sale:
From first Owner. Always been parked in a garage. Always been driven by patient old man for trips to the local store only. Unfortunatly he past away.
While the house was deserted the propulsion system was (asumingly) stolen by the local tractor pulling team so you purchase a vehicule without propulsion. Good luck with bidding!!


Fedde

ace_fedde wrote:Metiz,
What a shame! It melted I suppose?
Anyway, I don't need it anymore since I was outbidded on a vehicule that it was supposed to be mounted on:

For Sale:
From first Owner. Always been parked in a garage. Always been driven by patient old man for trips to the local store only. Unfortunatly he past away.
While the house was deserted the propulsion system was (asumingly) stolen by the local tractor pulling team so you purchase a vehicule without propulsion. Good luck with bidding!!

The attachment siberian14.jpg is no longer available

Fedde

That IS unfortunate! Better try this, then