"Thunderchine" 55 lb thrust pulsejet plans
Moderator: Mike Everman
Re: "Thunderchine" 55 lb thrust pulsejet plans
Combustion Chamber Bulkhead
- Attachments
-
- Combustion Chamber Bulkhead 2.PDF
- (48.22 KiB) Downloaded 641 times
Re: "Thunderchine" 55 lb thrust pulsejet plans
Almost complete.
Re: "Thunderchine" 55 lb thrust pulsejet plans
Now THAT'S more like it! good job man!
Just the final piece of tailpipe to take care of now looks like
Just the final piece of tailpipe to take care of now looks like
Quantify the world.
Re: "Thunderchine" 55 lb thrust pulsejet plans
All parts of the tailpipe are welded on.
I just need to take care of an engine mount, spark plug mount and fuel system.
For the fuel system I'm using 2 x 12 gallon per hour flow rate oil spray nozzles
I just need to take care of an engine mount, spark plug mount and fuel system.
For the fuel system I'm using 2 x 12 gallon per hour flow rate oil spray nozzles
-
- Posts: 16
- Joined: Fri May 09, 2014 2:57 am
- Antipspambot question: 125
Re: "Thunderchine" 55 lb thrust pulsejet plans
Hey, I was checking out the plans for this engine but I don't understand one thing, what's the splitter for and where does it go? Thanks
Re: "Thunderchine" 55 lb thrust pulsejet plans
I strongly suggest not building this engine. The tollerances are VERY tight and the slightest mistake will cause your engine to malfunction. Even if you build it to spec, it's very hard to start and not realy reliable. I would like to take this opportunity to blow my own whistle and suggest the M40 instead download/file.php?id=13105astroadrian99 wrote:Hey, I was checking out the plans for this engine but I don't understand one thing, what's the splitter for and where does it go? Thanks
Quantify the world.
-
- Posts: 16
- Joined: Fri May 09, 2014 2:57 am
- Antipspambot question: 125
Re: "Thunderchine" 55 lb thrust pulsejet plans
Ok Thanks manmetiz wrote:I strongly suggest not building this engine. The tollerances are VERY tight and the slightest mistake will cause your engine to malfunction. Even if you build it to spec, it's very hard to start and not realy reliable. I would like to take this opportunity to blow my own whistle and suggest the M40 instead download/file.php?id=13105astroadrian99 wrote:Hey, I was checking out the plans for this engine but I don't understand one thing, what's the splitter for and where does it go? Thanks