first fwe

metiz · Post by **metiz** » Tue Oct 03, 2006 6:18 pm

here's a video of my first jet. Its the first or second succesfull run so ignore the girly screaming :D

It's completly build from stainless, hand sawn, hammered and filed. A coluege of my father (father in the background) welded the thing and my uncle realy helped with the constuction of the larger parts and the ignition (thanks)

hagent · Post by **hagent** » Tue Oct 03, 2006 7:15 pm

Sounds nice but for some reason I can't see the video.

Hagen

Mike Spike · Post by **Mike Spike** » Tue Oct 03, 2006 7:19 pm

Same problem here

leo · Post by **leo** » Tue Oct 03, 2006 8:34 pm

Nice video, no problem in seeing it over here.
It runs on 256 Hz.
Congratulations with your first PJ.

metiz · Post by **metiz** » Tue Oct 03, 2006 9:00 pm

you probably can't see the video because of missing codecs. google xvid codec

Irvine.J · Post by **Irvine.J** » Wed Oct 04, 2006 1:36 am

Way to go! Brilliant stuff... video worked fine here.

larry cottrill · Post by **larry cottrill** » Wed Oct 04, 2006 12:34 pm

metiz, Congratulations!

Wonderful job ... I love the enthusiasm shown by your father. That's the first time I ever heard a video of anyone yell OVER the noise of a running pulsejet.

I can't see it here at work, but did see it at home. Very nice.

There's really nothing quite like the time you get your first one running. I remember messing around with trying to run my Elektra I: I know this should run ... I know it will run ... I know I can start this ... See? It's just about there, it's definitely going to run ... Yes! It really wants to run, just a little more fuel, or a little more air, no not quite right ... All right, with a little more length on it now, I know it will run ... OK, now there's a little MORE length, it's got to run ... Doggone it, now that the battery's charged up there's got to be a good spark, I know it'll run this time ... Maybe with this pipe sleeve added on ... Must have been too long before, now it should go ... Wow, there it is! Look at her go! Man, what a noise! ... Man! How can it DO that?

L Cottrill

El-Kablooey · Post by **El-Kablooey** » Wed Oct 04, 2006 3:18 pm

First run's are exicting aren't they? I know on my first run, which was with a 50lb lockwood, my dad and I laughed until our stomachs and cheeks were sore. I felt like a 5-year-old on christmas morning. I've been an addict ever since.

metiz · Post by **metiz** » Wed Oct 04, 2006 6:03 pm

I tried to run it again this night. didn't do anything, not even a flame. Turned out a bug crawled in the injector pipe....right... anyhoe, after it was gone it ran better and harder than ever :D

Jim Berquist · Post by **Jim Berquist** » Wed Oct 04, 2006 6:08 pm

I could not produce sound or video. Is there some way I could view it. Sounds like I'm missing some good stuff here.....Jim

metiz · Post by **metiz** » Wed Oct 04, 2006 6:36 pm

always willing to help :D google "xvid codec" and install it. That should probably do it

Jim Berquist · Post by **Jim Berquist** » Wed Oct 04, 2006 11:06 pm

Metiz: Is there any way you could post the video in another format??

I tried three time to down load xvid codec and just received corrupted files and trojan horses.

Jim

amarx · Post by **amarx** » Thu Oct 05, 2006 8:31 am

Hi 'berquistj@peoplepc.com'

There's an alternative:
- download the vlc player (if you don't have it yet...) under
http://www.videolan.org/vlc/download-windows.html
- download the movie file you want to watch under
http://www.pulse-jets.com/phpbb2/files/ ... 03_114.avi
and watch it with vlc

I couldn't watch the movie either on this page and like that it worked.

amarx

www.pulse-jets.com

first fwe

first fwe

Re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first fwe

re: first few

re: first fwe