Re: Looking for plans? Look here.
Posted: Sat Jun 27, 2009 5:14 am
thanks for the plans!!!! now I have a new plan! 
www.pulse-jets.com
"Home-made Jet Forum"
http://www.pulse-jets.com/phpbb3/
Looking for plans? Look here.
Page 2 of 2
Re: Looking for plans? Look here.
Posted: Tue Jun 30, 2009 2:13 pm
Are the links to the Pipewood plans working for anyone else? I changed "phpbb2" to "phpbb3" and I still get the 404 error message. Any suggestions?
Re: Looking for plans? Look here.
Posted: Tue Jun 30, 2009 5:57 pm
Here it is, starts out as the "Ugly Stick" and folds to the PipeWood:
viewtopic.php?f=3&t=1643
*picture of the injector are in the post
viewtopic.php?f=3&t=1643
*picture of the injector are in the post
Re: Looking for plans? Look here.
Posted: Tue Jun 30, 2009 6:21 pm
Re: Looking for plans? Look here.
Posted: Mon Jul 06, 2009 3:49 am
Thanks for doing those searches, Joe! I've spent a bit of time trying for simplest jet designs. I guess the simplest was the Kazoo, a simply smashed tube. gotta find that one..
Re: Looking for plans? Look here.
Posted: Mon Jul 06, 2009 7:52 pm
Enjoy this 75mm Locky Kazoo post:
viewtopic.php?f=3&t=262
lots of goodies in that one!
video on page 3, and some excel files, picture of the injector, etc.
viewtopic.php?f=3&t=262
lots of goodies in that one!
video on page 3, and some excel files, picture of the injector, etc.
Jims Little 3 Lb Thermojet
Posted: Wed Dec 16, 2009 7:51 pm
Topic: Jims Little 3 Lb Thermojet
by Eric on Oct 21, 2006
page 3 = PDF plans
viewtopic.php?f=3&t=3461&st=0&sk=t&sd=a&start=30
Page 4 = augmenter
viewtopic.php?f=3&t=3461&st=0&sk=t&sd=a&start=45
Page 18, Sep 28, 2007 design tweaks
Eric poted: "This new engine has a intake ID of .55 compared to .44 for his engine and .50 specified on the plans. The combustor can handle more air, so I figured why not give it to em.
Also the intake flares are quite subtantial flared from .55" to a hair under .90" instead of .65" . This gives it about 60% more cross section than Jims model, and pulls in a lot of air with the big flare."
by Eric on Oct 21, 2006
page 3 = PDF plans
viewtopic.php?f=3&t=3461&st=0&sk=t&sd=a&start=30
Page 4 = augmenter
viewtopic.php?f=3&t=3461&st=0&sk=t&sd=a&start=45
Page 18, Sep 28, 2007 design tweaks
Eric poted: "This new engine has a intake ID of .55 compared to .44 for his engine and .50 specified on the plans. The combustor can handle more air, so I figured why not give it to em.
Also the intake flares are quite subtantial flared from .55" to a hair under .90" instead of .65" . This gives it about 60% more cross section than Jims model, and pulls in a lot of air with the big flare."
Basic energy (wave) transfer
Posted: Thu Feb 18, 2010 3:26 am
Doc based on (the late) Walter Kadens research. Credit to the 2 stroke Tuners Handbook
Re: Looking for plans? Look here.
Posted: Tue Feb 23, 2010 6:26 am
I will put pics on soon
Re: Looking for plans? Look here.
Posted: Tue Feb 23, 2010 7:11 am
Here it is
Re: Looking for plans? Look here.
Posted: Tue Oct 04, 2011 11:32 am
Re: Looking for plans? Look here.
Posted: Thu Nov 10, 2011 11:25 am
Thread about augmentors / ejectors with research papers on effects on length, dia, etc.
viewtopic.php?f=3&t=6066&p=74767#p74767
Fedde
viewtopic.php?f=3&t=6066&p=74767#p74767
Fedde
Re: Looking for plans? Look here.
Posted: Wed Dec 14, 2011 8:20 pm
Since the old beck technologies doesn't exist anymore I looked only one time at the new website.
This evening I found the guys from pulsejetengines.com has uploaded the dimensions of the 12lb chinese Eric Beck made a long time ago.
http://www.pulsejetengines.com/wp-conte ... Thrust.pdf
This evening I found the guys from pulsejetengines.com has uploaded the dimensions of the 12lb chinese Eric Beck made a long time ago.
http://www.pulsejetengines.com/wp-conte ... Thrust.pdf
Re: Looking for plans? Look here.
Posted: Wed Nov 12, 2014 5:05 pm
I found a new one. It's rudimentary, but appears correct.
