Looking for plans? Look here.

Moderator: Mike Everman

jayidian
Posts: 5
Joined: Sat Jun 27, 2009 4:59 am
Antipspambot question: 125

Re: Looking for plans? Look here.

Post by jayidian » Sat Jun 27, 2009 5:14 am

thanks for the plans!!!! now I have a new plan! :lol:
Butuan City |

Ormoc City

RocketScientist
Posts: 4
Joined: Fri Jun 26, 2009 3:06 pm
Antipspambot question: 125
Location: Soso, MS

Re: Looking for plans? Look here.

Post by RocketScientist » Tue Jun 30, 2009 2:13 pm

Are the links to the Pipewood plans working for anyone else? I changed "phpbb2" to "phpbb3" and I still get the 404 error message. Any suggestions?
"Anyone who has never made a mistake has never tried anything new." - Albert Einstein

PyroJoe
Posts: 1743
Joined: Wed Aug 29, 2007 5:44 pm
Antipspambot question: 125
Location: Texas

Re: Looking for plans? Look here.

Post by PyroJoe » Tue Jun 30, 2009 5:57 pm

Here it is, starts out as the "Ugly Stick" and folds to the PipeWood:

viewtopic.php?f=3&t=1643

*picture of the injector are in the post
Attachments
pw1.jpg
pw2.JPG
ugly stick, revised 112706.JPG

PyroJoe
Posts: 1743
Joined: Wed Aug 29, 2007 5:44 pm
Antipspambot question: 125
Location: Texas

Re: Looking for plans? Look here.

Post by PyroJoe » Tue Jun 30, 2009 6:21 pm

Another pipeworks engine:
Weldless Chinese
viewtopic.php?f=3&t=2786&start=0
Attachments
WCN.JPG

Mike Everman
Posts: 4894
Joined: Fri Oct 31, 2003 7:25 am
Antipspambot question: 0
Location: santa barbara, CA
Contact:

Re: Looking for plans? Look here.

Post by Mike Everman » Mon Jul 06, 2009 3:49 am

Thanks for doing those searches, Joe! I've spent a bit of time trying for simplest jet designs. I guess the simplest was the Kazoo, a simply smashed tube. gotta find that one..
Mike
__________________________
Follow my technical science blog at: http://mikeeverman.com/
Get alerts for the above on twitter at: http://twitter.com/mikeeverman

PyroJoe
Posts: 1743
Joined: Wed Aug 29, 2007 5:44 pm
Antipspambot question: 125
Location: Texas

Re: Looking for plans? Look here.

Post by PyroJoe » Mon Jul 06, 2009 7:52 pm

Enjoy this 75mm Locky Kazoo post:

viewtopic.php?f=3&t=262
lots of goodies in that one!

video on page 3, and some excel files, picture of the injector, etc.
Attachments
lk.JPG
MVC-666S.JPG
MVC-669S.JPG

PyroJoe
Posts: 1743
Joined: Wed Aug 29, 2007 5:44 pm
Antipspambot question: 125
Location: Texas

Jims Little 3 Lb Thermojet

Post by PyroJoe » Wed Dec 16, 2009 7:51 pm

Topic: Jims Little 3 Lb Thermojet
by Eric on Oct 21, 2006

page 3 = PDF plans
viewtopic.php?f=3&t=3461&st=0&sk=t&sd=a&start=30


Page 4 = augmenter
viewtopic.php?f=3&t=3461&st=0&sk=t&sd=a&start=45




Page 18, Sep 28, 2007 design tweaks

Eric poted: "This new engine has a intake ID of .55 compared to .44 for his engine and .50 specified on the plans. The combustor can handle more air, so I figured why not give it to em.

Also the intake flares are quite subtantial flared from .55" to a hair under .90" instead of .65" . This gives it about 60% more cross section than Jims model, and pulls in a lot of air with the big flare."

Vermin
Posts: 281
Joined: Thu Feb 15, 2007 11:16 am
Antipspambot question: 0
Location: Ontario Canada

Basic energy (wave) transfer

Post by Vermin » Thu Feb 18, 2010 3:26 am

Doc based on (the late) Walter Kadens research. Credit to the 2 stroke Tuners Handbook
Attachments
THE BASIC PROCESS.doc
(1.87 MiB) Downloaded 430 times
Vern
A desire to destroy as many man made hydrocarbon compounds as possible in one lifetime.

nickwilson
Posts: 52
Joined: Tue Feb 02, 2010 8:44 am
Antipspambot question: 125

Re: Looking for plans? Look here.

Post by nickwilson » Tue Feb 23, 2010 6:26 am

I will put pics on soon
Attachments
Little Nick.jpg

nickwilson
Posts: 52
Joined: Tue Feb 02, 2010 8:44 am
Antipspambot question: 125

Re: Looking for plans? Look here.

Post by nickwilson » Tue Feb 23, 2010 7:11 am

Here it is
Attachments
100_3171.JPG

ace_fedde
Posts: 421
Joined: Mon Feb 16, 2009 9:26 pm
Antipspambot question: 0
Location: The Netherlands

Re: Looking for plans? Look here.

Post by ace_fedde » Tue Oct 04, 2011 11:32 am

Thermojet Info Pack
Uploaded by Kool

viewtopic.php?f=3&t=6318&p=74444#p74444
Your scepticism is fuel for my brain.

ace_fedde
Posts: 421
Joined: Mon Feb 16, 2009 9:26 pm
Antipspambot question: 0
Location: The Netherlands

Re: Looking for plans? Look here.

Post by ace_fedde » Thu Nov 10, 2011 11:25 am

Thread about augmentors / ejectors with research papers on effects on length, dia, etc.

viewtopic.php?f=3&t=6066&p=74767#p74767

Fedde
Your scepticism is fuel for my brain.

Kool
Posts: 115
Joined: Wed Oct 01, 2008 7:39 pm
Antipspambot question: 125
Location: The Netherlands

Re: Looking for plans? Look here.

Post by Kool » Wed Dec 14, 2011 8:20 pm

Since the old beck technologies doesn't exist anymore I looked only one time at the new website.

This evening I found the guys from pulsejetengines.com has uploaded the dimensions of the 12lb chinese Eric Beck made a long time ago.
http://www.pulsejetengines.com/wp-conte ... Thrust.pdf
Attachments
Valveless-Pulse-Jet-Engine-Plans-12-LB-Thrust.pdf
(1.64 MiB) Downloaded 1177 times
12lbs_chinese.jpg
...It's better to generate heat efficiently, than recover it efficiently...

tufty
Posts: 842
Joined: Wed Dec 24, 2003 12:12 pm
Antipspambot question: 0
Location: France
Contact:

Re: Looking for plans? Look here.

Post by tufty » Wed Nov 12, 2014 5:05 pm

I found a new one. It's rudimentary, but appears correct.

Image

Post Reply