hi all
this is mi first modelo atomjet, the 2 heads are preforted, during next weeks I will lathe the venturi.-
some suggestion before continuing working?
these models will be for an airplane rc
I am giving him a good look, although I don't like their exhaust pipe of 28mm a lot. . .
tanks for you time..
FRANCISCO COOREMAN
my firts ATOMJET
Moderator: Mike Everman
-
francisco
- Posts: 226
- Joined: Tue Nov 30, 2004 1:06 pm
- Antipspambot question: 0
- Location: RIO CUARTO, CORDOBA, ARGENTINA
my firts ATOMJET
- Attachments
-
- Dsc-2007009.jpg (46.02 KiB) Viewed 8258 times
-
- Dsc-2007014.jpg (46.25 KiB) Viewed 8258 times
-
- Dsc-2007019.jpg (41.76 KiB) Viewed 8258 times
-
- Dsc-2007016.jpg (43.79 KiB) Viewed 8258 times
-
- Dsc-2007000.jpg (41.2 KiB) Viewed 8257 times
-
francisco
- Posts: 226
- Joined: Tue Nov 30, 2004 1:06 pm
- Antipspambot question: 0
- Location: RIO CUARTO, CORDOBA, ARGENTINA
more pics...
do you like?
do you like?
- Attachments
-
- Dsc-2007016.jpg
- (42.01 KiB) Downloaded 169 times
-
- Dsc-2007010.jpg (37.06 KiB) Viewed 8144 times
-
- Dsc-2007018.jpg (43.67 KiB) Viewed 8145 times
-
- Dsc-2007017.jpg (37.85 KiB) Viewed 8144 times
-
- Dsc-2007021.jpg (54.55 KiB) Viewed 8144 times
[/url]-
francisco
- Posts: 226
- Joined: Tue Nov 30, 2004 1:06 pm
- Antipspambot question: 0
- Location: RIO CUARTO, CORDOBA, ARGENTINA
Atomjet
thanks!
now if this the head finaly in 99%, tomorrow factory the spiral spiral in step 1.25 or the 2 (metica) and ring…
single I hope that the pulse starts well!
this whole like a mirror!
that it happens if I use stainless 304?
FRANCISCO COOREMAN
now if this the head finaly in 99%, tomorrow factory the spiral spiral in step 1.25 or the 2 (metica) and ring…
single I hope that the pulse starts well!
this whole like a mirror!
that it happens if I use stainless 304?
FRANCISCO COOREMAN
- Attachments
-
- Dsc-2007000 (2).jpg (32.72 KiB) Viewed 8081 times
-
- Dsc-2007002 (2).jpg (37.14 KiB) Viewed 8082 times
-
francisco
- Posts: 226
- Joined: Tue Nov 30, 2004 1:06 pm
- Antipspambot question: 0
- Location: RIO CUARTO, CORDOBA, ARGENTINA
Atomjet inyector
here I leave photos of the injector of air/fuel of the Atom.
all this perforated so as indicates the plane.
it has 2 hollows of 0,5mm
I have perforated with a DREMEL to 25000-30000 rpm and I have only to breack 1 lards…
single lack to thread the injector and head, and to make the nozzle…
that it happens if I use stainless 304?
FRANCISCO COOREMAN
all this perforated so as indicates the plane.
it has 2 hollows of 0,5mm
I have perforated with a DREMEL to 25000-30000 rpm and I have only to breack 1 lards…
single lack to thread the injector and head, and to make the nozzle…
that it happens if I use stainless 304?
FRANCISCO COOREMAN
- Attachments
-
- Dsc-2007020.jpg (49.14 KiB) Viewed 7925 times
-
- Dsc-2007022.jpg (28.73 KiB) Viewed 7925 times