As014

Moderator: Mike Everman

Post Reply
Pieter van Boven
Posts: 181
Joined: Sun Oct 05, 2003 2:54 pm
Antipspambot question: 0
Location: the Netherlands
Contact:
Contact Pieter van Boven

As014

Post by Pieter van Boven » Mon Oct 06, 2003 7:31 pm

Hi members of this great new pulse-jet forum. I hope this place will be as great as the old forum. Thanks Kenneth!
I tried to post an attachment of one of my CAD drawings wich is converted to a gif-file. I hope it will show up!

Pieter.
Attachments
Stege-001gif.GIF
(12.96 KiB) Downloaded 447 times
Top
Viv
Posts: 2158
Joined: Sat Oct 04, 2003 2:35 pm
Antipspambot question: 125
Location: Normandy, France, Wales, Europe
Contact:
Contact Viv

Argus read blocks

Post by Viv » Mon Oct 06, 2003 9:30 pm

Hi.

Did the original read holders have a curve for the read to lay against? I noticed the radius on your drawing.

Very nice by the way.

Viv
Top
Pieter van Boven
Posts: 181
Joined: Sun Oct 05, 2003 2:54 pm
Antipspambot question: 0
Location: the Netherlands
Contact:
Contact Pieter van Boven

Post by Pieter van Boven » Tue Oct 07, 2003 3:37 pm

Yes it has a curve with a radius of 40mm. I noticed that it is hard to read the dimensions so if you want the CAD-drawing just drop me a line.

Pieter.
Top
Post Reply

Return to “Valved pulsejet forum”