Yet another new offering, for serious experimenters only. Use this anywhere a permanent tailpipe tuning device is needed or desirable. For example, you might want to tune for optimum length because of altitude variations, experimenting with widely differing fuels, etc. Designed by Larry Cottrill, expertly fabricated in heavy gauge stainless by Jim Russell Design of Des Moines, Iowa USA:
I don't have the sales page created yet, but you can order via PayPal. Note that the prices listed below are considered "introductory" pricing -- they may change somewhat by the time I get the sales page going.
Here are the details:
- 100 percent stainless steel TIG welded construction - heavy 18 GA material
- Over 1/2-inch (15mm) tailpipe OD range adjustment
- Integral guides to hold cylindrical alignment
- Heavy duty striker lugs for easy fore-and-aft adjustment
- Easy adjustment for exact fit on tailpipe - no need to overtighten
- Ample length for effective tuning
- Easy tuning even when hot - loosen screws slightly, gently tap the striker lugs with a tool to move forward or aft, then re-tighten
- Price (as shown in list below) INCLUDES packaging, shipping and insurance
- Ships in 4 weeks (max.) from receipt of order
How to order the model you need:
- Select from the list below, by tailpipe OUTSIDE diameter. Every inch = 25.4 mm.
- Use PayPal.com to make your payment to firstname.lastname@example.org (you can use most any credit card if you don't have your own PayPal account) - Iowa USA purchasers please add 6 percent for State of Iowa Sales Tax.
- Be sure to use your full name and COMPLETE shipping address
- Cut and paste the bold portion of one of the following into the PayPal 'Comments' box:
Qty: 1 - Model: PRO-050 - jetZILLA ProTuner - 50-65mm diam x 75mm long - $40.00 US
Qty: 1 - Model: PRO-060 - jetZILLA ProTuner - 60-75mm diam x 95mm long - $45.00 US
Qty: 1 - Model: PRO-070 - jetZILLA ProTuner - 70-85mm diam x 105mm long - $50.00 US
Qty: 1 - Model: PRO-080 - jetZILLA ProTuner - 80-95mm diam x 115mm long - $55.00 US
Qty: 1 - Model: PRO-090 - jetZILLA ProTuner - 90-105mm diam x 125mm long - $60.00 US
Qty: 1 - Model: PRO-100 - jetZILLA ProTuner - 100-115mm diam x 135mm long - $70.00 US
Qty: 1 - Model: PRO-110 - jetZILLA ProTuner - 110-125mm diam x 135mm long - $80.00 US
Qty: 1 - Model: PRO-120 - jetZILLA ProTuner - 120-135mm diam x 135mm long - $90.00 US
Qty: 1 - Model: PRO-130 - jetZILLA ProTuner - 130-145mm diam x 135mm long - $100.00 US
Qty: 1 - Model: PRO-140 - jetZILLA ProTuner - 140-155mm diam x 135mm long - $110.00 US
Cottrill Cyclodyne Corporation
Mingo, Iowa USA
Anything you need or want to sell goes here.
Moderator: Mike Everman
1 post • Page 1 of 1