Updates

Off topic posts are welcome in this forum!
No smear campaign, or you will be banned!

Moderator: Mike Everman

Post Reply
luc
Posts: 761
Joined: Fri Dec 05, 2003 5:05 pm
Antipspambot question: 125
Location: Quebec, Canada

Updates

Post by luc » Tue Jun 15, 2010 7:06 pm

Hi guys,

Okey ... I will make this short ...

Conception GLC inc. is closed and since a while now. I am no longer the president of this company, nor an administrator either, Although it seems that according to some laws here, I still retains "Some" authorities as a "Defacto Administrator" being one of the last one.

But heyyy ... I really don't care anymore, now taking care of my new life and which in fact, is much more pleasant and quiet then it was before. Actually, I am becoming the living proof of "If you want something new to come ... Leave the OLD STUFF behind", which I did, and putting all my attention where it needs to be, including one or two last things that I will soon take care off, before completely turning the page.

Now remember ... That even if no longer associated with the past, I still retain ALL the knowledge and data ... If needed :lol:

This said ... Think twice before putting your money into unnecessary "Pockets", for you never know ... It might come FREE :D

Cya,
Luc
Designer & Inventor

metiz
Posts: 1517
Joined: Fri Apr 21, 2006 6:34 pm
Antipspambot question: 125
Location: Netherlands

Re: Updates

Post by metiz » Tue Jun 15, 2010 8:30 pm

Hey Luc

What happend? I thought GLC was on a roll :?
Quantify the world.

luc
Posts: 761
Joined: Fri Dec 05, 2003 5:05 pm
Antipspambot question: 125
Location: Quebec, Canada

Re: Updates

Post by luc » Wed Jun 16, 2010 4:42 am

metiz wrote:Hey Luc

What happend? I thought GLC was on a roll :?
Hi ...

Baaaaa ... Long story ... To long and waist enough time over all this and all.

Cya
Luc
Designer & Inventor

MARQUIS
Posts: 12
Joined: Thu Apr 07, 2011 9:52 pm
Antipspambot question: 125

HELP!!!

Post by MARQUIS » Fri May 27, 2011 6:07 pm

I read with sadness information on GLC Canada, is same thing for BECK Technologies ??? : after ten Mail : no answer ....
Please, somebody has a phone number of Frank ? T.You , MARQUIS

MARQUIS
Posts: 12
Joined: Thu Apr 07, 2011 9:52 pm
Antipspambot question: 125

Re: HELP!!!

Post by MARQUIS » Wed Jun 08, 2011 4:53 pm

MARQUIS wrote:I read with sadness information on GLC Canada, is same thing for BECK Technologies ??? : after ten Mail : no answer ....
Please, somebody has a phone number of Frank ? T.You , MARQUIS

Mike Everman
Posts: 4926
Joined: Fri Oct 31, 2003 7:25 am
Antipspambot question: 0
Location: santa barbara, CA
Contact:

Re: Updates

Post by Mike Everman » Thu Jun 09, 2011 2:11 pm

Who is frank?
Mike
__________________________
Follow my technical science blog at: http://mikeeverman.com/
Get alerts for the above on twitter at: http://twitter.com/mikeeverman

metiz
Posts: 1517
Joined: Fri Apr 21, 2006 6:34 pm
Antipspambot question: 125
Location: Netherlands

Re: Updates

Post by metiz » Thu Jun 09, 2011 2:25 pm

Mike Everman wrote:Who is frank?
Frank, Eric, Darned keys are so close to each other!
Quantify the world.

MARQUIS
Posts: 12
Joined: Thu Apr 07, 2011 9:52 pm
Antipspambot question: 125

Re: Updates

Post by MARQUIS » Sat Jun 11, 2011 10:13 pm

Mike Everman wrote:Who is frank?
meby "Frank "is mistake of my , in fac I want infos. on BECK TECHNOLOGIES. : multi Mails = no answers
I am in FRANCE , alone, lonely,solitary, ...Thanks

Mike Everman
Posts: 4926
Joined: Fri Oct 31, 2003 7:25 am
Antipspambot question: 0
Location: santa barbara, CA
Contact:

Re: Updates

Post by Mike Everman » Sun Jun 12, 2011 12:02 am

I believe Eric is out of business and moved on to other things. I do not have a way of contacting him. I hope he shows up and corrects me if I'm wrong.
Mike
__________________________
Follow my technical science blog at: http://mikeeverman.com/
Get alerts for the above on twitter at: http://twitter.com/mikeeverman

MARQUIS
Posts: 12
Joined: Thu Apr 07, 2011 9:52 pm
Antipspambot question: 125

Re: Updates

Post by MARQUIS » Sun Jun 12, 2011 6:04 pm

Mike Everman wrote:I believe Eric is out of business and moved on to other things. I do not have a way of contacting him. I hope he shows up and corrects me if I'm wrong.
Thanks very much Mike. Marquis-Marseille-France!

MARQUIS
Posts: 12
Joined: Thu Apr 07, 2011 9:52 pm
Antipspambot question: 125

Re: Updates

Post by MARQUIS » Thu Jun 23, 2011 3:03 pm

MARQUIS wrote:
Mike Everman wrote:I believe Eric is out of business and moved on to other things. I do not have a way of contacting him. I hope he shows up and corrects me if I'm wrong.
Thanks very much Mike. Marquis-Marseille-France!
Bonjour, follow my problem with "Beck Techno."(and your answer,thanks) it seems Mr Simpson (NZ) has also disapeared :
no answer after multi mails !! Have you heard about ? Merci ! always alone, lonely ...etc. in France Marquis.

luc
Posts: 761
Joined: Fri Dec 05, 2003 5:05 pm
Antipspambot question: 125
Location: Quebec, Canada

Re: Updates

Post by luc » Thu Jun 23, 2011 3:53 pm

Bonjour Marquis,

Following this thread, it just cam to my mind that maybe no one has disapeared, but just carrying out their own business quietly or to busy doing what they like best, designing and building engines over answering 1000 questions.

There was a time I use to spend days answering questions and mostly, repeating what was already written on this forum.

In fact, you might find after a bit of search and reading here, that all the answers are mostly available and just need a bit of research and reading ... :wink:

Just a friendly taugh :wink:

Good day,
Luc
Designer & Inventor

MARQUIS
Posts: 12
Joined: Thu Apr 07, 2011 9:52 pm
Antipspambot question: 125

Re: Updates

Post by MARQUIS » Thu Jun 23, 2011 10:51 pm

luc wrote:Bonjour Marquis,

Following this thread, it just cam to my mind that maybe no one has disapeared, but just carrying out their own business quietly or to busy doing what they like best, designing and building engines over answering 1000 questions.

There was a time I use to spend days answering questions and mostly, repeating what was already written on this forum.

In fact, you might find after a bit of search and reading here, that all the answers are mostly available and just need a bit of research and reading ... :wink:

Just a friendly taugh :wink:

Good day,
I d'ont speek with you and your PAMPHLET is as a whole out of my questions. MARQUIS

luc
Posts: 761
Joined: Fri Dec 05, 2003 5:05 pm
Antipspambot question: 125
Location: Quebec, Canada

Re: Updates

Post by luc » Fri Jun 24, 2011 1:21 pm

I d'ont speek with you and your PAMPHLET is as a whole out of my questions
Like said, it was just a ... "Friendly" ... taugh.

Good luck anyway,
Luc
Designer & Inventor

luc
Posts: 761
Joined: Fri Dec 05, 2003 5:05 pm
Antipspambot question: 125
Location: Quebec, Canada

Re: Updates

Post by luc » Sat May 05, 2012 3:30 am

This is when I started to get what is called "A Life" ... Back ... Although Highly damaged at this time ...

But in all "Negative", there is always "Positive" ... You just need to know how and where to look ... :lol:
Luc
Designer & Inventor

Post Reply