www.pulse-jets.com

Hi, Sorry I missed this one looking at the original date it was published ... For the valve, .25mm = .0098" which I don't think is too thick. In fact, I would say the valve is too thin for an engine that size. My pulse jet was probably 1/3 scale of your engine and it ran very well with .018" (.46mm)...

Dear Members, Now is the time for me to close this story once and for all, for all that had to be done and said was, and the perpetrator being properly delt with now ... ;-) Through this story, many of you remained passif watching this none sens, while some of you were kind and supportive to me and ...

Heyy Guys, Look what I've offered my self and my family for X-Mass ... ;-) http://fr.arcticcat.com/snow/sled/XF1100CrossTour#orange Did a few ride with it already and Mannnnn ... TOTALLY INSAINEEEE the power this thing has ... You ride at 50 klm/h then floor the trottle and this thing raise on its t...

Congrats on you pilot's license Luc. Thanks Mark ... :wink: And good luck with your 101 ways to cook moose, It's already in much smaller 1 to 2 pounds, rapped and frozen pieces .... So, no problems with the cooking ... :lol: they being so large. ha Large you say ... NO S H I T ... Heyyyyy ... I'm t...

Yeaaa ... Hood flying is very nerve racking, especially if you get into 27 knots winds.

Overall, all went well and I now enjoying a bit of a break time.

Thanks for the congrads John,

Regards,

Congratulations on getting your "Wings" :-) Heyyy John ... How are you buddy? ... :wink: Yeaaaa ... Thanks. Went through my flight exam yesterday morning, with half of it being on the ground with questions about "Onboard mandatory paperwork, aircraft performances, endurance and specifics. Then, it ...

I am now ..... A PILOT ... Yesssssssssss ...

And by the way ... My partner and I got our Moose this year too ...

A very good year in perspective, and when we are good to life and others ... Life is usually good for us ...

Best refards guys ...

daab wrote:Luc, on this engine, where you place the injector?

This injector was for my DIY turbine and it was placed right in the middle of the flame tube, right into the flame.

How hot is the gasoline going to get? To answer this question, I will just point out that my injector/evaporator was designed so the major part of the outside tube stands in the combustion flame, thus, it should become VERY hot. Of coarse, the fluid flowing inside will contribute to drop that tempe...

Ok so you say it might work, just not too long before the sutt starts blocking things? Posibly ... With a big "P" and big "Maybe". How long do you think I have: Not a clue ... For I never work with gasoline nor this injector was design for. it's not like I'll run this thing often and long, and the ...

how will vaporising gas create sutt? I thought that only happend when burned at a low temperature Because there is always a certain level of oxygen in any fluid. Although it would not allow and support combustion, it would create a form of oxydation and/or reaction, leaving residues inside. But hey...

Sweet! will that work wor something like gasoline as well? Naaaaa ... This was designed to transit liquid propane to vapor in a most rapid time and shortest lenght. Well ... Gasoline might work for a while, but you do understand that vaporizing gasoline will create carbon and once that carbon build...

Here ... Go see this;

viewtopic.php?f=6&t=6373#p74659

How's the build going? I'm curious on how you are going to design your fuel system. Fueling was always an issue with my big lockwoods. Keith Naaaaaaaa ... I've designed a very effective fuel evaporator/injector that he can find the drawings for in my gas turbine posting and use it for his big lockw...

Hi, The two top pictures are of a valveless pulse jet and I think they call it a "Thermojet". The rest of the pictures shows regular valved pulse jets, with one picture showing the inside valve and valve plate. As for prices, look for similar engines on Ebay and this will give you what they are wort...