www.pulse-jets.com

there should have been a picture with this

Sorry for the crudeness of the drawing this PJ has one witch serves as both exhaust and inlet, this is not as radical as some might think, Bruno Ogorelec on the bottom of his web site Valveless Pulsejets 1_5 By Bruno Ogorelec.mht. He Talks about the Reynst, witch is a modified version of the 'jam ja...

the first sujsted chainge i am puting forword for people to concider is to make the combustion chamber; circular, spherical, or toroidal. and to have the intake and the exaust enter it tangetialy, such that they make air in the chamber spin around. this should alow the air to continue to enter the c...

i thought sonic choking was one of the problems to be dealt with?
the fact that the gas coming down the exaust gets to the speed of sound then can not go any faster, dispite having the enregy avialabel to do so if the phisics alowed!

i am quite new to pulse jets, however being the XXXXXXXX that i am i thought i would invent my own, with a little feed back from you's the targest are useable levels fo thrust. quiet operation. and high "super sonic" exaust velosity. if we can manage ether of the last two without losing the firstit ...

Hi all. I would like to build a small thermojet to power a small and light remote control hydroplane, The boat weighs approximately 250g. My idea is to build a thermojet and use a modified blow torch to fuel it. I have modified a servo for 4x 360 degree turns to enable me to open the valve for thro...

take any type of pulsjet that as not been optimised,
what has to be done to optimise it for heat production?
what has to be done to optimise it for exaust valosity?

An outline for a working fusion reactor. A catalysed D + D = He4 using the following steps. I.Pb207 + D = Bi209. II.Bi209 + D = Po211. III.Po211 + D = At213 OR Po211 = Pb207 + a. IV.At213 = Bi209 + a. the first two steps being achieved by sonoluminescents fusion in liquid alloy. Now in English for p...