www.pulse-jets.com

Here's a video of a reynst jar I made a while ago. I recorded it with an IR webcam hanging on a crappy laptop so framerate isn't great. Video only.

hehe well here's the thing I did use chicken wire but I didn't now how to call it (dutch). Looking back I think wrapping metal wire in a spiral around it is a better id. Then again, I could't find any chicken wire or similair mashing that was fine enough so I just went on and tried this.

MUCH lighter compared to the weight of steel. easily 50% off

I've used Bison kit you can get it at the local hardware store. Translated directly from dutch it's "Fireplace kit". Here's a link with an illustration http://www.bison.nl/NL/nl/view.do?UID=af993e0fc2c7dd2dc07c64 I'm going to build a small FWE from stainless now so I'll have the parts anyway. See if...

Hi Some time ago I decided to try and build a pulse-jet. Problem is, I can't weld or mold/ cut steel at all so I tried another method. In the local hardware store, I found a kit that was capable of withstanding temperatures of up to 1250 degrees C and dried up rock hard. Went and got myself some oas...

50 lbs lockwood
http://www.pulse-jets.com/phpbb2/download.php?id=1789

yeah I know but I had to know for sure, would be kind of a hard thing to fix once it's on (trust me on that one) but thanks for the answers!

in the small 2.25 pounds FWE drawing posted on this forum, it says that the horizontal part of the intake should be "hovering" approx 1 cm above the exhaust pipe. Is this very important or can it be up a bit more, say 3-5 cm so that it's slightly diagonal?

thnx

is 550 degrees c air enough to ignite propane?

is 550 degrees c air enough to ignite propane?

1 mm at least and stainless is better than plain

great setup thnx for the video!

*cough* I see..... right..... my bad but anyhoe, thats just a small steel pipe with 1/8 inch diameter right, nothing special on there or anything?

Hi I'm planning on building my first pulse jet; this one http://www.pulse-jets.com/phpbb2/download.php?id=4233 but I don't now a whole lot about fuel injectors. what kind of (basic) fuel injector should I use and is it something you can make yourself or can I buy it of the shelf? I've also heard tha...