Search found 421 matches

by ace_fedde
Tue Sep 24, 2013 8:15 am
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Start system? Lightweight gas bottle, found it deserted somewhere after a festival. Have two of them.
luchttank.jpg
Mind the cannisters full of FREE :D vegetable oil next to it. Great fuel for my van. And for PJ's?
by ace_fedde
Tue Sep 03, 2013 7:56 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Kerosin is not available to me anymore :(
But I'll make a nice mix of gasoline, diesel and vegetable oil. Actually the pumps will be a mixing device :shock:
by ace_fedde
Sun Sep 01, 2013 8:37 am
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

I worked with in the past with high pressure pumps. There were no rubber seals inside those pumps. Instead they have some kind of bakelite seal to seperate the water from the oil in the carter. I don't share the concerns. Instead, if we use diesel, I expect the pumps to survive longer than on water ...
by ace_fedde
Sat Aug 31, 2013 2:44 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

I found two single phase high pressure water cleaners, together they will do the job. One pumps 6l/min, the other 7,5l/m. Right now I'm (finally!) building them together :D . Metiz, did you already think about starting up methods? Somehow I don't just see you stick the little compressed air pistol i...
by ace_fedde
Wed Jul 24, 2013 9:10 am
Forum: Ramjet forum
Topic: Pop Sci Ramjet
Replies: 7
Views: 13452

Re: Pop Sci Ramjet

Oxidyne.inc wrote:oh its dead... :( i wanted to see what others had to say...
Not completely dead, but very slow lately....
by ace_fedde
Sat Jul 13, 2013 8:28 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Here it's explaned, unfortunately in Dutch (which is no problem for Metiz and me :D )

http://www.elektronicaforum.nl/post43762.html
by ace_fedde
Tue Jul 09, 2013 5:39 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Metiz, The motorized pump on my photo delivers 11l/min, that should be enough. At 10 bars the electrical power needed and taken will be much much lower. If needed I even have larger pumps if needed. Displacement doesn't change, so the flow stays the same at lower pressures. You wil need two bypasses...
by ace_fedde
Tue Jul 09, 2013 3:16 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Metiz, The other pump is normally also electric driven, but also an IC- engine could be used (or even steam :D ). The pumps have metal or ceramic pistons, and plastic/metal valves. I don't see why they wouldn't work with fuel. 2 kW would be for a pump that's working at 150-200 bar with 10-12l/min. W...
by ace_fedde
Mon Jul 08, 2013 7:40 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

I just found two pumps, one with motor and one without. The one with motor is 11l/min, the other one 8l/min. You can easily decrease these numbers with a bypass valve. The motor is now set for 3-phase 380 volts. I need to now what capacitor I need to make it 1-phase 220 volts. Anybody? These pumps a...
by ace_fedde
Sat May 18, 2013 8:54 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

So, so, so to busy to do fun stuff, even to think of fun stuff.... :( Tried to find some materials, found them, then no clue where I left them, found them again, etc.... What I have out of high pressure water cleaners: 2 or 3 ful pumps with lot's off brass nozzles (should cool themselves with the fu...
by ace_fedde
Tue Feb 05, 2013 8:55 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Nice pic's. Better than porn!! :D
by ace_fedde
Wed Jan 23, 2013 8:35 pm
Forum: Valveless pulsejet forum
Topic: Senior Project- Designing and building pulsejet
Replies: 9
Views: 10620

Re: Senior Project- Designing and building pulsejet

In the past (in Holland) it was possible to buy butane in bottles/tanks. The problems was that if those tanks stood outside in a harsh winter, the butane wouldn't evaporate anymore and could in bad installations even suck air in the tank. That led to a few explosions. After that it was forbidden to ...
by ace_fedde
Wed Jan 02, 2013 5:10 pm
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

Well let's guess:

M500 = 500 pounds of thrust (hopefully :D ), TSFC = 2,5 >> 1250 pounds of fuel per hour? Oooops :shock:

That's about 10 liters a minute. Pumps can handle that, can your wallet?? :lol:

Fedde
by ace_fedde
Wed Jan 02, 2013 11:38 am
Forum: Valveless pulsejet forum
Topic: M500 build log
Replies: 161
Views: 156348

Re: M500 build log

I found some pump and nozzles. Did you already compute or guess :P how much fuel it is going to need?

Fedde