www.pulse-jets.com

One possibility is a feeding of pressurized fuel towards a small inert gas cylinder as shown in the attachment. The nozzle must design it.

http://webserver.dmt.upm.es/zope/DMT/Me ... nables.pdf

Could you please identify the fundamental frequency of attachments, thanks

which software do you use?

updates, previews, etc; what happened with the engine in the latest version?

Bruno Ogorelec, could you illustrate this idea, showing a picture? :?: "A long time ago, I proposed a cylindrical form of the Tesla valve, Which you get if you rotate the original item around one of the long sides. You get a tube with a serrated center spike and a series of conical washers, Which wo...

Hi Manolo

What brand and model of machine is?, Uses argon? It is an adaptation? is ac / dc?

daab

And how they can weld the sheets of 0.3 or 0.5 mm to fit properly sealed? with which equipment? With which technique?

Luc, on this engine, where you place the injector?

In the picture Gluhareff intake, the separation stage is 0, but the thrust is very low 3.5 pounds. Add sound file for evaluation.

daab

Metiz, where you place the injector, out, middle, far inside the intake, waht are clue?, show picture please!

Could tell us how to get the plan?

Thanks

daab

Tom, larry cottrill, Mike Everman, luc, viv, someone could say something?

well, I hope to help me with the solution. if I have a four-inch tube and I tone it sonically, with the following information: 1 .- The tube receives a continuous load of air-propane mixture in a 15:1 ratio 2.-The estimated speed of sound in the middle is 768 m / sec. calculated based on the formula...

Gluhareff say: The "2nd stage is 1/2 wave length and 3er stage is 1/4 of the same wave length" which means this statement? Questions: all! but for now ... - When we know that an engine is tuned? - How tune in sonically? Cutting or lengthening the stage or what? - Someone can give a lecture on attune...

Sorry for my poor English, is English translator google.
Finally what happened to the Pulseramjet? luc and viv will agree? 3 pounds of thrust or 45? The subject is too interesting to quit.
daab